7i76E - síťová kombinovana karta pro krokove motory

8440CZK

(cena bez DPH)

  • Kód: MESA7i76E
  • Přepravní hmotnost: 0.4lbs
  • 3 Balení skladem
  • Výrobce: MESA Electronics

Přidat do košíku:

The 7I76E is a remote FPGA card with Ethernet interface designed for interfacing up to 5 Axis of step&dir step motor or servo motor drives. The 7I76E also provides a spindle encoder interface, isolated analog spindle speed control and 48 isolated I/O points for general purpose field I/O use. All step and direction outputs are buffered 5V signals that can drive 24 mA. All outputs support differential mode to reduce susceptibility to noise. An isolated analog spindle voltage with direction and enable outputs is provided for spindle control as is a single spindle encoder channel with TTL or differential inputs. 48 points of isolated field I/O are provided for general control use including limit switch and control panel inputs, coolant enable and tool changer control outputs. Isolated I/O includes 32 sinking inputs and 16 sourcing outputs. Inputs can sense 5V to 32V signals and the outputs can switch 5V through 28V signals. Maximum output load is 300 mA. Outputs are short circuit protected. In addition to the being able to read digital on/off status of each input, four input pin voltages are readable with 8 bit resolution, and two MPG encoder inputs are provided as an option on four field inputs. Field I/O is powered by an isolated 10-32V field power source. One RS-422 interface is provided for I/O expansion via a serial I/O daughtercard. In addition to the on card I/O, two FPGA expansion connectors compatible with Mesa's 25 pin daughtercards allow almost unlimited I/O options including additional quadrature encoder inputs, absolute encoder inputs, step/dir outputs, field I/O expansion etc. All field wiring is terminated in pluggable 3.5 mm screw terminal blocks.

Tento produkt byl přidán dne Tuesday 14. September 2021.

Vaše IP adresa je: 34.207.247.69
Copyright © 2021 CNC MESA-shop
CNC Prestavby